SPECIFICATIONS

DIMENSIONS
	Overall length
	Overall width
	Overall height
	Wheelbase
	Seat height
	Footpeg height
	Ground clearance
	Dry weight   49 states/Canada type
		California type
	Curb weight  49states/Canada type 
		California type
	Maximum weight capacity

2050 mm (80.7 in)
710 mm (28.0 in)
1155 mm (45.5 in)
1430 mm (56.3 in)
810 mm (31.9 in)
377 mm (14.8 in)
135 mm (5.3 in)
193 kg (425 lbs)
194 kg (428 lbs)
215 kg (474 lbs)
216 kg (476 lbs)
178 kg (392 lbs)
FRAME
 	Front axle travel
 	Front fork stroke
 	Rear axle travel
 	Front tire size
 	Rear tire size
 	Caster angle
 	Trail length
 	Fuel tank capacity

109 mm (4.3 in)
120 mm (4.7 in)
124 mm (4.9 in)
120/702R17 (58W)
180/552R17 (73W)
24° 50'
97 mm (3.8 in)
16.0 L (4.23 US gal, 3.52 Imp gal)
ENGINE
	Bore and stroke
	Displacement
	Compression ratio
	Intake valve opens
		closes
	Exhaust valve opens
		closes
	Engine dryweight
	Firing order

98.0 x 66.0 mm (3.90 x 2.60 in)
995.7 cm3 (60.74 cu. in.)
9.4:1
20° BTDC (At 1 mm lift)
45° ABDC (At 1 mm lift)
50° BBDC (At 1 mm lift)
15° ATDC (At 1 mm lift)
74.2 kg (163.6 lbs)
Front 270° Rear 450° Front
DRIVE TRAIN
	Primary reduction
	Final reduction
            
	Gear ratios:
		1st
		2nd
		3rd
		4th
		5th
		6th

1.681           (74/44)
2.562           (41/16)


2.733           (41/15)
1.812           (29/16)
1.428           (30/21)
1.206           (35/29)
1.080           (27/25)
0.961           (25/26)
LUBRICATION SYSTEM
	Engine oil capacity
		After draining
		After draining/filter change
		After disassembly
	Oil pressure (at oil pressure swithc)


3.7 L (3.9 US qt, 3.3 Imp qt)
3.9 L (4.1 US qt, 3.4 Imp qt)
4.5 L (4.8 US qt, 4.0 Imp qt)
588 kPa (6.0 kgf/cm2, 85 psi)
	@ 5000 rpm/80° C (176° F)
FUEL SYSTEM
	Carburetor identification number
		49 states/Canada type
		California type
	Main jet
	Slow jet
	Jet needle number
	Pilot screw opening
		49 states/Canada type
		California type
	Float level
	Idle speed


VPT2A
VPT1A
Front: #175, Rear: #178
#45
Front: A1UF, Rear: A1UE
Initial opening:
	2-3/4 turns out
	3 turns out
16.6 ± 0.5 mm (0.65 ± 0.02 in)
1200 ± 100 rpm
COOLING SYSTEM
	Coolant capacity
		Radiator and engine
		Reserve tank
	Radiator cap relief pressure
	Thermostat
		Begin to open
		Fully open
		Valve lift


2.86 L (0.756 US gal, 0.629 Imp gal)
0.71 L (0.188 US gal, 0.156 Imp gal)
108~137 kPa (1.1~1.4 kfg/cm2, 16~20 psi)

73~77° C (163~171° F)
90° C (194° F)
8 mm (0.3 in) minimum
CYLINDER HEAD/VALVE
	Cylinder compression at 350 rpm
	Valve clearance
		IN
		EX

1128 kPa (11.5 kfg/cm2, 164 psi)

0.16 ± 0.03 mm (0.006 ± 0.001 in)
0.31 ± 0.03 mm (0.012 ± 0.001 in)

Wheelie back one pageWheelie

This site is designed and maintained by KAMware.